GO GO fish for Evan

 Hi there, this is a little video of a GoGo fish I made for Evan in W.A.  It's pretty well a standard GoGo-fish but with a little more volume in the nose as requested by Evan. The deck is quite flat which helps distribute the volume evenly. With the rails low and foiled and a generous curve in the plan shape, the board will feel fresh and sparky throughout the turns and will perform well in a variety of wave conditions.The tape up, cut lap and custom tinted glass job was done by Yuki and I, and the sweet timber fins made by me. The bespoke leggy loop in the tail is a lovely addition to free the deck space of a leg rope plug so you can get your foot right back if you need to. This forward feeling volume board will paddle in early, catch the waves easily and with the lower rails, surf well off the nose.   

 

                       

         ....the dims on the board are 5'7'' x 201/2'' x 25/8'' and about 35 litres....

 ....the bespoke tail loop.....


CHRIS GARRETT SHAPES PHANTOM SURFBOARDS
CHRIS GARRETT SHAPES PHANTOM SURFBOARDS

Author

HAND SHAPED // HAND GLASSED FROM MY SHED TO YOURS S I N C E ~ 1979



Leave a comment

Comments will be approved before showing up.