News

GO GO fish for Evan

 Hi there, this is a little video of a GoGo fish I made for Evan in W.A.  It's pretty well a standard GoGo-fish but with a little more volume in the nose as requested by Evan. The deck is quite flat which helps distribute the volume evenly. With the rails low and foiled and a generous curve in the plan shape, the board will feel fresh and sparky throughout the turns and will perform well in a variety of wave conditions.The tape up, cut lap and custom tinted glass job was done by Yuki and I, and the sweet timber fins made by me. The bespoke leggy loop in the tail is a lovely addition to free the deck space of a leg rope plug so you can get your foot right back if you need to. This forward feeling volume board will paddle in early, catch the waves easily and with the lower rails, surf well off the nose.   

 

                       

         ....the dims on the board are 5'7'' x 201/2'' x 25/8'' and about 35 litres....

 ....the bespoke tail loop.....

Harmony Hull for Kevola

Hi there surf junkies,  just a quick look at a Harmony Hull that I did for my mate Kevola. Loving the concept but liking a bit more length we stretched out this popular design to 8 feet. This board was hand painted by me and Kevola added the OM and mantra across the bow. A one off custom skull logo on the bottom to finish her up. Yuki and I glassed her before choosing my own designed  Harmony fin for the centre fin and the side bites were the rear quads out of the CGQB's.  

She's was out the door before Longo got a chance to video her but I'm sure a picture's word a thousand word and here they are...

                            

      ....the dimensions are 8' x 221/2'' x 3''....Kevloa is about 6' and weighs 95 kgs.....

                            

...I think he is happy with it !! .....Cheerios amigos!

Harmony Hull for Ryan

Hi there surfboard lovers!....just another tweak to my popular micro mal called the Harmony Hull. Basically it's the same concept however Ryan wanted a mid length feel to this board.....some thing to cruise on but still have a bit of performance in it despite it's length and nest between his short boards and his logs. Relaxed flatter rocker with a triplane hull in the nose allowing for cheater nose rides. A bit of tail lift providing release in the tail and with the down foiled rails keeping you alive and sensitive on edge, puts you in tight in the pocket when you need it. All this coupled with my own uniquely designed harmony fin templates for maximum performance. Yummo 

As always, Yuki and I did the glassing, so we were able to thoughtfully use cut fibreglass patches for an aesthetic and functional appeal. I feel privileged to create surfboards for individuals and I really like the boards I make. To be honest, I'm pretty sorry to see this one leave the factory but I guess, it's on to the next one !!  

   

                        

      .... the dimensions...7'2'' x 213/4'' x 23/4'' .... Ryan is 5' 8'' and weighs 70 kgs ....

tug deluxe for Martin

Hi there again....just want to show you a custom Tug-deluxe that I made for Martin. This one is a pretty basic board that he will use for those bigger days. There's plenty of thickness in this one for the paddle but I kept it out of the rails so it's stills maintains  sensitivity and bight in the waves face. A single to double concave with flat out of the tail when you need to step on the gas. The rounded pin makes the board feel shorter than it is. A nice even rocker with a little accelerated tail lift gives you a broad sweet spot so your never out of footing and don't have to think about your board. Free and effortless to enjoy the waves with out the hangups. This is just one of the many features that come standard with my boards. :-) 

 

                            tug deluxe

The dims on this Tug-deluxe is 6'3'' x 191/2'' x 25/8''... 33.6 litres... Martin is 5'11'' and weighs 78kgs